MY SITE
Home
About
RCHS
Orientation to Technology
STEM 1
Contact
Creating a Guitar (Semester 1)
Making a center line to punch holes into fretboard.
Punching holes to mark for the drill press.
Using drillpress to create a space for white marking dots.
Drilling holes into the neck to be able to glue fretboard to neck.
Cutting out the neck design.
The laser engraving on the headstock.
Drilling holes to glue headstock design to the neck.
Clamping on the headstock design to the neck with a call, after glueing.
Rounding the backside of the neck.
Rounding the headstock flush to the neck.
Filing over the backside of the neck.
Using the orbital sander to make the neck more smooth.
Glueing inside parts to the front of the board.
Scraping excess glue off the front.
Glueing the kerfing onto my guitar.
Sanding the curved side of my soundboard.
Creating a Guitar (Semester 2)
Making marks to cut out spots to glue the backside of the soundboard.
Flush trimming the guitar.
Flush trimming the side of my neck.
Routing the top of the soundboard.
Putting frets into my neck.
Gluing on the banding to my soundboard.
Gluing banding onto the front.
Sanding the sides of my soundboard.
Sanding the front of my guitar.
Pocketing the body for the neck.
Drilling holes to screw my neck into the body.
Pushing in the last fret.
Filing down the frets.
Removing handle from body.
Gluing the bridge to the body.
Drilling holes in bridge for pins.
Me with my finished guitar
Our STEM class with our finished guitars.
Home
About
RCHS
Orientation to Technology
STEM 1
Contact